Use Tutorial

What is a Thunderbolt3 dock? What is the use? how to use?

Thunderbolt 3 docking station is mainly used to expand common HDMI^® interface, DP interface, Type-c3.1 interface, USB3.0 interface, Gigabit Ethernet port, SD/TF card reading interface, 3.5mm headset integrated interface, etc.; support external 2 4K monitors

2022-01-19 ekL

60m HDMI^® KVM network cable extender HEK60 use graphic tutorial

Compared with the HDMI^® single network cable extender, HEK60 has an additional function of synchronously transmitting USB signals, which can be used to connect a mouse and keyboard; it supports 1920*1080p 60Hz resolution and EDID, which is very suitable for scenarios where the host needs to be centrally managed.

2022-01-05 ekL

DP HDMI^® KVM dual screen switch 4 in 1 out 41DH connection tutorial

The DP HDMI^® KVM switch is designed to meet the needs of computer hosts with only 1 HDMI^® output and 1 DP signal output on the market. The need for 4 computers to share 1 set of keyboard, mouse and 2 monitors

2021-12-13 ekL

HDMI^® matrix KVM switch 2 in 2 out 212HN connection instructions

HDMI^® KVM matrix switcher adopts 2 input and 2 output design to realize the simultaneous (cross) display of the main screen and the secondary screen of two computer hosts, and supports the keyboard and mouse transparent transmission (through) mode

2021-11-26 ekL

How to use ekl converter? Common converter connection method

Generally, audio and video converters do not need to install drivers, and they can be used normally after connecting the device. However, the steps for connecting different converters will be different. The following article explains in detail the connection and use methods of audio and video converters.

2021-11-03 ekL

How to separate audio from HDMI^®? Working principle of HDMI^® audio splitter

The HDMI^® audio splitter is to solve the problem that some hosts with only 1 HDMI^® output interface want to use the audio and video in the HDMI^® signal at the same time

2021-10-15 ekL

VGA audio matrix 8 in 8 out v818a tutorial

VGA audio matrix v818a can use a 3.5mm to L / R lotus head cable to connect the VGA host audio to the input L / R audio input interface of matrix v818a respectively, and then use a red and white lotus head audio cable to connect the matrix audio to the power amplifier

2021-09-06 ekL

75 ohm to 120 ohm converter G703 connection tutorial

According to the 75 ohm to 120 ohm converter connection diagram, it can be quickly connected and used. The factory default settings of G703 meet the needs of most users. The user can freely set whether to connect the shielded line between the 75 ohm to 120 ohm interface.

2021-09-03 ekL