DP HDMI KVM dual screen switch 4 in 1 out 41DH overview
DP HDMI KVM switch is to meet the needs of the graphics card on the market with only 1 HDMI output + 1 DP signal output computer host to achieve 4 computers The requirement of sharing 1 set of keyboard, mouse and 2 monitors; supports simultaneous use of the HDMI interface and DP interface of the same computer host, and can also operate the main screen and the secondary screen on the same host, which can greatly improve work efficiency
DP HDMI KVM dual screen switch 4 in 1 out 41DH
DP HDMI KVM dual-screen switch 4 in 1 out 41DH features
01, support Windows, Mac, Linux, Android and other multi-system use
02. Support USB2.0 and USB1.1 devices
03, support HDMI2.0, HDCP2.2 protocol parameter standards
04、Support DisplayPort1.2 protocol parameter standard
05, support input and output resolutions up to 3840*2160@60Hz YUV4:4:4
06, support USB interface plug-in automatic recognition detection, automatic scanning, computer sleep wakeup and other functions
07. No need to install drivers, plug and play, convenient and quick to use, compatible with most wireless, mechanical, gaming and other keyboards and mice on the market
08. The signal source input channel can be switched by keyboard hotkeys, mouse, panel buttons, infrared remote control, RS232 serial port, etc.
09. It has ESD protection function inside and supports hot swapping
DP HDMI KVM dual-screen switch 4 in 1 out 41DH interface description
DP HDMI KVM dual screen switch 4 in 1 out 41DH interface introduction
DP HDMI KVM dual-screen switch 4 in 1 out 41DH connection diagram
DP HDMI KVM dual-screen switch 4 in 1 out 41DH connection diagram
DP HDMI KVM dual screen switch 4 in 1 out 41DH switching mode
The first switching method: key switch
directly press the ①, ②, ③, ④ buttons on the panel to switch to the corresponding computer host
Second switching method: infrared remote control switching
Directly aim the remote control at the KVM switch panel or infrared extension receiver and press the corresponding 1, 2, 3, 4 number keys, you can switch to the corresponding computer host
The third switching method: mouse switching
Double-click the middle mouse wheel + right mouse button to move to the right to cycle; double-click the mouse middle wheel + left mouse button to go left For cyclic switching, the operation time needs to be completed within 2.5 seconds
The fourth switching method: keyboard hotkey switching
supports 5 hotkey combinations: R'Ctrl/L'Ctrl/Scroll lock /Num lock/Caps lock defaults to: R'Ctrl hotkey mode
Note: If the R'Ctrl hotkey mode is changed to any of the 5 hotkey modes After one type, the R'Ctrl key needs to be changed to the current hotkey combination mode during operation; R represents the right side, and R'Ctrl represents the Ctrl key on the right side of the keyboard
Schedule: Keyboard Hotkey Menu
| Double-click R'Ctrl+1~4+Enter | Switch to host 1~4 |
| Double-click R'Ctrl+B+Enter | Buzzer on and off |
| Double-click R'Ctrl+T+Enter | The channel input power-on recognition function is turned on and off |
| Double-click R'Ctrl+M+Enter | Turn on and off the mouse switch function |
| Double-click R'Ctrl+R+Enter | The reset function is on |
| Double-click R'Ctrl+S+Enter | Turn on and turn off the input channel cycle switching function |
| Double-click R'Ctrl+S+8-999+Enter | Input channel cycle switching function time setting |
The fifth switching method: RS232 serial communication switching
Attached table: RS232 communication code, baud rate
| Serial port settings | 115200bps, 8 bits of data, 1 stop bit, check code: None, hexadecimal |
| Enter 1 | 0x30 0x30 0x30 0x0a 0x0d |
| Enter 2 | 0x30 0x30 0x31 0x0a 0x0d |
| Enter 3 | 0x30 0x30 0x32 0x0a 0x0d |
| Enter 4 | 0x30 0x30 0x33 0x0a 0x0d |
DP HDMI KVM dual-screen switch 4 in 1 out 41DH specifications
Input/output resolution: 3840x2160P@60Hz/30Hz, 2560x1440P@144Hz/120Hz/60Hz, 1920x1080P@60Hz/1280x720P@60Hz, etc.< /span>
HDMI protocol version: HDMI2.0
HDCP protocol version: HDCP2.2
HDMI transmission rate: 18Gbit/s
DP protocol version: DisplayPort1.2
DP maximum transfer rate: 21.6Gbit/s
USB protocol: USB2.0, USB1.1, USB1.0
Maximum working voltage and current: 5V/800mA
Operating temperature range: -10 to +60°C
Operating temperature range: 5 to 90%RH (non-condensing)
Power adapter specifications: AC 100V-240V 50-60Hz input, DC5V/1A output
Material: Iron shell
Size: 220x57.2x56.6mm
Weight: 550g