HDMI Matrix KVM Switch 2 in 2 out 212HN Overview
HDMI KVM matrix switcher with 2 inputs and 2 outputs can realize the simultaneous (cross) display of the main screen and the secondary screen of two computer hosts; support the sharing of USB devices such as keyboard, mouse, printer, U disk, etc.; support key-mouse transparent transmission (pass-through) mode , Operate two hosts at the same time; support HDMI2.0 protocol, resolution can support up to 3840x2160P@60Hz; suitable for video conferencing, multimedia teaching, securities finance, office and other fields
HDMI matrix KVM switch with two inputs and two outputs
HDMI matrix KVM switch 2 in 2 out 212HN features
01、Support Windows, Mac, Linux, Android and other mainstream operating systems
02、Support the use of USB2.0 and USB1.1 devices
03、Support HDMI2.0, HDCP2.2 protocol parameter standards
04、Support input and output resolutions up to 3840*2160P@60Hz
05、No need to install drivers, plug and play, convenient and quick to use, compatible with most wireless, mechanical, gaming and other keyboards and mice on the market
06、The signal source input channel can be switched through various methods such as keyboard hot keys, mouse, panel buttons, infrared remote control, RS232 serial port, etc.
07、Internal ESD protection function, can support hot swap
HDMI matrix KVM switch 2 in 2 out 212HN interface description
HDMI matrix KVM switch 2 in 2 out 212HN interface introduction
Mode 1: Simultaneous display of the primary and secondary screen signals of the No. 1 host
Mode 2: Simultaneously display the main and sub-screen signals of No. 2 host
Mode 3: Display the main screen signals of No. 1 and No. 2 hosts at the same time, and support keyboard and mouse crossing
Mode 4: Display the main screen signals of No. 1 and No. 2 hosts alternately, supporting keyboard and mouse crossing
HDMI matrix KVM switch 2 in 2 out 212HN connection diagram
Schematic diagram of HDMI matrix KVM switch 2 in 2 out 212HN connection
HDMI matrix KVM switch 2 in 2 out 212HN connection demonstration video
HDMI matrix KVM switch 2 in 2 out 212HN switching mode
The first switching method: panel button switching
Press the [Mode1], [Mode2], [Mode3] buttons on the panel to switch to the corresponding display mode, where [Mode1] only displays the main and secondary screens of host 1, and [Mode2] only displays the main and secondary screens of host 2. Secondary screen; [Mode3] is the main screen that only displays host 1 and host 2
The second switching method: infrared remote control switching
Directly use the delivered infrared remote control to aim at the HDMI KVM switch 212HN panel and press the corresponding button to switch to the corresponding computer host, which is more convenient to use
The third switching method: mouse switching
Double-click the middle wheel of the mouse + right button to switch to the right, double-click the middle wheel of the mouse + left button to switch to the left. It should be noted that the operation must be completed within 2.5 seconds.
The fourth switching method: keyboard hotkey switching
Support 5 hot key combinations: R'Ctrl/L'Ctrl/Scroll lock/Num lock/Caps lock
The default is: R'Ctrl hotkey mode
Note: If the R'Ctrl hotkey mode is changed to any of the 5 hotkey modes, the R'Ctrl key needs to be changed to the current hotkey combination mode during operation.
| Switch mode hot key combination replacement | |
| Double-click on the right side of the keyboard Ctrl+left Ctrl+Enter | Change the hotkey combination to L'Ctrl |
| Double-click the right side of the keyboard Ctrl+Scroll lock+Enter | Change the hotkey combination to Scroll lock |
| Double-click the right side of the keyboard Ctrl+Num lock+Enter | Change the hotkey combination to Num lock |
| Double-click the right side of the keyboard Ctrl+Caps lock+Enter | Change the hotkey combination to Caps lock |
| Double-click the right side of the keyboard Ctrl+the right side of the keyboard Ctrl+Enter | Change the hotkey combination to Ctrl on the right side of the keyboard |
| Hotkey function introduction | |
| Double-click the right side of the keyboard Ctrl+A+1-2-3-4 | Switch to output mode 1-2-3-4 |
| Double-click the right side of the keyboard Ctrl+T+Enter | Mouse through function on and off |
| Double-click the right side of the keyboard Ctrl+M+Enter | Mouse switch function on and off |
| Double-click the right side of the keyboard Ctrl+R+Enter | The reset function is turned on (re-computer USB device) |
| Double-click the right side of the keyboard Ctrl+S+Enter | Input channel cycle switching function on and off |
| Double-click the right side of the keyboard Ctrl+S+8-999+Enter | Input channel cycle switching function time setting |
The fifth switching method: RS232 serial communication switching
Baud rate: 115200bps, 8 data, 1 stop bit, check code: None, hexadecimal
| RS232 communication code | |
| Mode 1 | 0x30 0x30 0x30 0x0a 0x0d |
| Mode 2 | 0x30 0x30 0x31 0x0a 0x0d |
| Mode 3 | 0x30 0x30 0x32 0x0a 0x0d |
| Mode 4 | 0x30 0x30 0x33 0x0a 0x0d |
HDMI matrix KVM switch 2 in 2 out 212HN specifications
Input/output support resolution: 3840x2160P@60Hz/30Hz, 2560x1440P@144Hz/120Hz/60Hz, 1920x1080P@60Hz/1280x720P@60Hz, etc.
HDMI protocol version: HDMI2.0
HDCP protocol version: HDCP2.2
Maximum transmission rate:18Gbit/s
USB protocol:USB 2.0、USB 1.1、USB 1.0
Maximum working voltage/current:5V/800mA
range of working temperature:0~70℃
Operating humidity range: 5 to 90%RH (non-condensing)
Power adapter specifications: AC 100V-240V 50-60Hz input, DC5V/2A output
Product material: iron shell
Product Size:260x84x28mm
Product weight:1.1kg