Brief introduction of digital audio to analog audio converter DAN
How to convert digital audio to analog audio? The digital audio to analog audio converter DAN perfectly solves this problem. It can not only convert the coaxial and optical digital audio losslessly into 1 analog L/R audio + 1 3.5mm stereo audio , Also supports PCM, Dolby, DTS audio format decoding; the audio converter DAN adopts the latest audio capture technology, supports 32~96KHZ full capture; can be widely used in home or professional audio audio conversion, can pass standard RCA style jack or 3.5 The mm audio port is connected to peripheral devices such as power amplifiers and subwoofers.
Digital audio to analog audio converter DAN
Features of Digital Audio to Analog Audio Converter DAN
01. It can convert 1 coaxial or optical fiber digital audio signal into 1 analog L/R audio + 1 3.5mm stereo audio
02. Support sampling rate of 44.1 32., 48-96KHz
03. Support PCM, Dolby, DTS audio format decoding
04. Input stream code 24-bit, provide electronic noise reduction technology transmission
05. The input stream is 24bit S/PDIF left and right channels
06, no electromagnetic noise transmission
07. Simple installation, plug and play
Introduction of DAN interface of digital audio to analog audio converter
Introduction of DAN interface of digital audio to analog audio converter
Digital audio to analog audio converter DAN connection diagram
Digital audio to analog audio converter DAN connection diagram
Digital audio to analog audio converter DAN specifications
Support sampling rate: 44.1 32., 48—96KHz
Input stream: 24bit S/PDIF
Audio input interface: optical cable interface*1, RCA (coaxial)*1
Audio output interface: RCA (R/L) *1, 3.5mm stereo audio interface *1
Maximum working current: 150mA
Power adapter specifications: AC input (50 /60Hz): 100V-240V, DC output: 5V/1A
Working temperature: 0~40℃
Working humidity range: 5~85%RH (no condensation)
Size: 60*55*20mm