Introduction to SDI Fiber Extender SDF01
In high-definition multimedia monitoring application systems, it is often necessary to transmit high-definition uncompressed digital audio and video signal sources over long distances. However, when using ordinary cables for long-distance transmission, there will always be short transmission distances, poor output signals, and easy interference. Can not meet the long-distance transmission requirements of multimedia information publishing and other occasions, using SDI fiber optic extenders can completely solve such problems
The SDI fiber optic extender SDF01 is composed of a transmitter and a receiver. The fiber optic cable is used to connect the two devices. The transmission distance can be extended by 1 meter to 20 kilometers. After the signal is not compressed, the video signal is output with high fidelity; At the same time, SDI optical transceiver has the advantages of low attenuation, bandwidth, strong anti-interference, high safety, small size, light weight, etc., so it has incomparable advantages in long-distance transmission and special environments.
SDI fiber optic extender SDF01
SDI fiber optic extender SDF01 features
01、Small attenuation, bandwidth, strong anti-interference, high safety, small size, light weight
02、The optical mode adopts SC interface, which can be hot-plugged on site
03、Use single-mode fiber
04、Support HDSDI signal input and output instructions
05、No need to drive, support plug and play
06、The highest resolution supports 1920*1080I@60Hz
SDI fiber optic extender SDF01 interface introduction
SDI fiber optic extender SDF01 interface introduction
SDI fiber optic extender SDF01 connection diagram
SDI fiber optic extender SDF01 connection diagram
Main index of SDI fiber optic extender SDF01
SDI fiber optic extender SDF01 main index chart
SDI fiber optic extender SDF01 specifications
Optical fiber interface: single-mode optical fiber, the interface type is FC/PC
Reverse data: transparent data transmission, RS422 format, support maximum data rate 115200bps
Power consumption: 2W (max.)
Power supply voltage: DC 5~15V
Optical fiber: meet the 1000BASE_LX optical connection specification in IEEE802.3z
Input optical center wavelength: 1310nm
Transmitting power: -9.5~-3dBm, average optical power @1310nm
Optical receiving sensitivity: -21dBm, average optical power @1310nm
Output light modulation amplitude:180μW
Input light modulation amplitude:≤15μW
Relative signal strength:-116 DB/Hz
Return loss:≤10 dB
Transmission code rate:240M Hz~1.49G Hz
Transmission distance: 1m~300m multimode fiber; 1m~20km single mode fiber
Operating temperature:0~40℃
Relative humidity: 5~85%RH (no condensation)
Size：100*84*25mm