Introduction to HDMI fiber optic extender HF200
HDMI optical fiber extender HF200 is based on optical fiber transmission media, which can extend audio and video signals up to 20 kilometers; it can support up to 1080P@60Hz resolution; it can be widely used in video conference systems, broadcast television systems, closed-circuit television systems, and television monitoring systems , Highway display screen, etc.
HDMI fiber optic extender HF200
Features of HDMI fiber optic extender HF200
01、Use optical fiber cable instead of HDMI cable for transmission, which can extend up to 20 kilometers
02、Support up to 1080P@60Hz resolution
03、Support audio signal synchronous transmission
04、Automatically adjust the feedback information, balance or enlarge, no need to worry about the length of the line
05、Using HDMI standard cable, the input/output transmission distance can reach 15 meters
06、Can be used through fiber optic switches to achieve one-to-many use
07、easy installation
HDMI fiber optic extender HF200 interface introduction
HDMI fiber optic extender HF200 interface diagram
Indicator light description：
P : Power indicator, when the light is on, it means the power is connected
F : Optical fiber indicator, when the light flashes, it means that the optical fiber is connected
D : Data transmission indicator, the indicator light is always on when HDMI signal is connected, and it flashes when there is signal communication
① Audio interface: audio signal input
② HDMI interface: HDMI signal input
③ Indicator light: signal indicator
④ SC optical fiber interface: connect optical fiber
⑤ Audio interface: connect audio equipment
⑥ Indicator light: signal indicator
⑦ HDMI interface: connect to display device
⑧ SC optical fiber interface: connect optical fiber
⑨ Power interface: power input
⑩ Ground wire interface: connect the ground wire
⑪ Reset switch: press to reset the device
Schematic diagram of HDMI optical fiber extender connection and use
Schematic diagram of HDMI fiber optic extender HF200 connection use
HDMI fiber optic extender installation method
Use the HDMI cable to connect the transmitter to the HDMI host, and the receiver to the HDMI display according to the connection diagram. Then use the SC fiber optic cable to connect the transmitter to the receiver; if you need to use the host’s 3.5mm stereo audio, use the male For the male 3.5mm audio cable, connect the 3.5mm audio output of the HDMI host to the 3.5mm audio interface of the transmitter, and then you can use the 3.5mm audio at the receiver; after connection, connect the ground wire to the transmitter and receiver respectively. Then connect it to the power supply and it can be used normally
Specifications of HDMI fiber optic extender HF200
Support HDMI resolution:720P/1080P@60Hz
Maximum transmission bandwidth:225MHz
Maximum transmission rate:6.75Gbps
Optical fiber transmission distance: single fiber transmission 20 kilometers
Input cable length:≤15m HDMI standard cable
Output cable length:≤15m HDMI standard cable
Maximum working current:300mA
Audio transmission: support DTS/HD/Dolby-ture HD/LPCM7.1/DTS/Dolby-AC3/DS, etc.
Power adapter specifications: DC:5V/1A
Operating temperature：0~40℃
Working humidity range: 5~85%RH (non-condensing)
Transmitter size：146*91*26mm
Transmitter weight：262g
Receiver size：146*91*26mm
Receiver weight：260g