How to connect DVI fiber optic extender DF200?
DVI Fiber Extender DF200 Overview
The DVI fiber extender DF200 supports resolutions up to 1080P@60Hz. Based on fiber-optic transmission media, the audio and video signals are extended for transmission, and the maximum transmission distance can reach 20 kilometers. The DVI Fiber Extender DF200 uses a high quality circuit design to ensure high quality signal transmission. DVI fiber optic extender DF200 can be widely used in video conferencing systems, broadcast television systems, closed circuit television systems, video surveillance systems for video surveillance systems.
DVI fiber optic extender DF200
DVI fiber optic extender DF200 features
01. Single fiber can replace DVI line transmission distance up to 20 kilometers, 1080P@60Hz
02. Support audio signal transmission
03. Automatically adjust feedback information, balance or zoom in, users do not need to worry about the length of the line
04. Use DVI standard cable, input / output transmission distance up to 15 meters
05. Simple installation
DVI fiber optic extender DF200 panel / interface introduction
DVI fiber optic extender DF200 panel / interface
DVI fiber extender DF200 panel indicator description
P : Power indicator, when the light is on, it indicates that the power is connected.
F : The Fiber indicator light indicates that the Fiber is connected when the light is blinking.
D : The data transmission indicator light indicates that data transmission is normal when the light is blinking.
DVI fiber extender DF200 interface description
① audio port：Audio signal input
② DVI interface：DVI signal input
③ Indicator light：Signal indicator
④ Fiber interface：Connecting Fiber
⑤ Audio port :Connecting audio equipment
⑥ DVI interface：Connecting display device
⑦ Indicator light：Signal indicator
⑧ Fiber interface：Connecting Fiber
⑨ Power interface：power input
⑩ Ground interface：Connecting ground
⑪ Reset switch：Press to reset the device
DVI fiber extender DF200 connection diagram
DVI fiber extender DF200 connection diagram
DVI fiber optic extender DF200 technical parameters
Support DVI resolution：720P/1080P@60Hz
Maximum transmission bandwidth：225MHz
Maximum transmission rate：6.75Gbps
Fiber transmission distance：Single fiber transmission 20 km
Input cable length：≤15m DVI standard cable
Output cable length：≤15m DVI standard cable
Maximum operating current：300mA
Audio transmission：support DTS/HD/Dolby-ture HD/LPCM7.1/DTS/Dolby-AC3/DS
Power adapter specifications：DC 5V/1A
Operating temperature：0~40℃
Operating humidity range：5~85%RH（No condensation）
Sender size：146*91*26mm
Sender weigth：262g
Receiver size：146*91*26mm
Receiver weigth：260g