40 m HDMI single cable extender (EX01) Instructions for use
HDMI single cable extender supports resolution up to 1080P, based on a single CAT5/6 network cable transmission medium, the maximum transmission distance can reach 40 meters, using high-quality circuit design to ensure high quality double transmission. This product can be widely used in video matching systems of video conferencing systems, broadcast television systems, closed circuit television systems, and television monitoring systems.
01. A CAT6 line can make the transmission distance reach 40 meters and the resolution remains 1080p.
02. Automatically adjust feedback information, balance or zoom in, users do not need to worry about the length of the line
03. Supports 1.65Gbps/frame rate (total frame rate 4.95Gbps) bandwidth
04. Using AWG24 HDMI standard cable, the input transmission distance can reach 15 meters, and the output transmission distance can reach 15 meters.
05. Built-in EDID
06. Lossless signal
07. Simple installation
HDMI single cable extender (EX01) sender panel introduction
HDMI single cable extender (EX01) receiving end panel introduction
System connection diagram
HDMI single cable extender (EX01) system connection diagram
Input and output HDMI resolution: 480i/480p/720p/1080i/1080p
Maximum transmission bandwidth: 160MHz
Maximum transmission rate: 4.95Gbps
Input and output TMDS signal: 0.5-1.5Vp-p (TTL)
Input and output DDC signal: 5Vp-p (TTL)
Input cable length: ≤15m AWG26 HDMI standard cable
Output cable length: ≤15m AWG26 HDMI standard cable
Maximum operating current: 300mA
Working temperature: (-15 - +55 ° C)
Operating temperature range: 5 - 90% RH (no condensation)
Transmitter size: 52*24*17mm
Transmitter weight: 12g
Receiver size: 52*24*17mm
Receiving end weight: 12g
To ensure reliable use of equipment and the safety of personnel, please observe the following when installing, using and maintaining:
01. Do not use this product in the following places: dust, oil smoke, conductive dust, corrosive gas, flammable gas; exposed to high temperature, condensation, wind and rain; vibration and shock; electric shock, Fire and mishandling can also cause damage and deterioration of the product.
02. Avoid wiring in the charged state, plug in the cable plug, otherwise it will easily lead to electric shock or circuit failure.
03. This product is grounded through the grounding wire of the power cord. To avoid electric shock, the grounding wire must be connected to the ground. Before connecting the input or output of this product, be sure to ground the product properly.
04. All external power supplies must be cut off before installation, wiring, etc.
05. In the following cases, please disconnect the power immediately and contact the company:
A. Equipment water
B. The equipment is broken or the casing is broken.
C. The device is working abnormally or the performance of the display has completely changed.
D. The device produces odor, smoke or noise
06. Please do not repair the equipment yourself.
PDF document download address:http://www.sz-ekl.com/download/56.html